Showing posts with label woodworking. Show all posts
Showing posts with label woodworking. Show all posts

Sunday, June 22, 2014

Cherry shelf with drawer

Made this cherry shelf with drawer for the kitchen,  needed some extra storage. Made my own cherry dowels for assemble. Using a dowling tool and die from lee valley.

Monday, August 26, 2013

Woodshop layout

I spent the weekend starting a new laout in the shop.
Started by rearranging my shop bench and hand tool area. The cherry case holds all my planes, chisels and dovetail saws.
I will put up lumber storage racks next weekend.

I also put all my powertools on wheels.

I will show more pics next weekend.

Sunday, August 10, 2008

Fine Woodworking , Best chisels on the market

The October 2008 issue of Fine Woodworking has and article on the Best chisels on the Market. The article in on Bench chisels and does a test on the most popular chisels on the Market.
They test 23 brands and picked the Lie Nielsen at the best overall western style chisel on the market.
The runner up is the Pfeil Swiss Made brand. I have a set of the Swiss Made chisels. I not only have the bench chisels but also have the carvings chisels as well. I think these are the best chisels out there, but have never tried a Lie Nielsen chisel. I do have other Lie Nielsen products like planes and saws and do fine them to be exceptional good.
In the test of 6 categories the Lie Nielsen chisels got 2 excellent, 3 very goods and 1 good. The Swiss made got 2 excellent and 4 very goods. The price of the Lie Nielsen is $50 and the Swiss made is $31.
So for my money the Swiss made is a better chisel. If I some day have a chance to try the Lie Nielsen , I might change my mind but for the time being,I will continue to use the Swiss made. I like the way they feel in my hand, they stay sharp. They do not take much work to keep them sharp and they cut true. I use the bench chisels for cutting dovetails, mortises and for general trimming work.
Please visit my web site at http://nokeswoodworks.com

Saturday, May 17, 2008

Father's Day Gift for the Woodworker

It's that time of year again, to think about what to get Dad for Father's day. If your Dad is a woodworker then I am sure a surprise woodworking tool will be in order. One idea could be to go to Woodcraft and get a gift certificate. A gift certificate will allow him to get anything he wants.
As a woodworker, I confess that any tool, even if I already have one, is a great gift. I have 3 drills and 3 routers and I use them all.
A new square is always needed. A set of drill bits, is always useful. Woodworking books are always a favorite for me. A new circular saw by Dewalt or Porter Cable is on my wish list.
A Bosch Colt trim router is a great idea. If your Dad is into carving, Woodcraft has just come out with a new line of Hock Knives, you can't go wrong with a new detail knife from Hock. If your Dad has a lathe, try a new Sorby spindlemaster turning tool, unless of course you want to purchase him a new lathe.
If you are not into buying tools or books, Dad's can always use a new baseball cap.
Please visit my web site http://nokeswoodworks.com/

There is a link to woodcraft in the side bar.

Sunday, April 27, 2008

Carbara Pen Kit using a Rattlesnake Blank

Rattlesnake Pen
I used a rattlesnake pen blank and a Black Titanium Carbara Pen kit to build this rattlesnake pen. These blanks are more difficult to turn compared to wood or regular acrylic. Care must be taken because the acrylic can be easily lifted off the surface of the snakeskin because of the chemicals used to tan the snake hides. Sharp tools must be used.
The blanks come with the brass tube already inside the skin and acrylic. Therefore you do not need to drill and glue the brass tube.
You will however have to size the blank and square the ends. The sides of the blanks are also removed during the sanding process. See the drawing that came with the blank for this detail.

The edges were sanded and the blank was placed on the lathe. I used a spindlemaster lathe tool to turn the blank down to size. The lathe tools must be extremely sharp. I stopped 4 times to hone the tool while cutting the blank to size. I stopped cutting short of the bushing size. Sandpaper was used to complete the projects. I used micro mesh and an acrylic finish to complete the blank. The blank was assembled using a pen press. More ideas can be seen at my web site:
http://nokeswoodworks.com/

The rattlesnake blank and pen kit came from: Arizona Silhouette at http://ArizonaSilhouette.com .



Saturday, April 12, 2008

Building a Woodcraft 68 point skinner knife kit

Woodcraft Skinner knife kit




This past week I bought and assembled the Woodcraft 68 point skinner knife kit, using Bocote wooden knife scales.
The kit did not come with instructions, but I found a set I could down load at the Woodcraft web site. I used the knife as a template and marked the handles for cutting.. I drilled one hole and placed a brass pin thru the hole before drilling the next hole.

After the holes were drilled, I checked alignment and cut the handles out on the bandsaw. I cut on the out sides of the lines. So the handles were a bit over size. I then shaped and sanded the part of the handle near the knife which was not mounted to the blade. This was done so the finish on the knife blade will not be damaged. After this I used one hour epoxy to glue the handles to the knife blade. I then inserted the brass pins with epoxy also. The brass pins had to be cut shorter to fit the handle and knife. I clamped handles and blade together with several clamps and wiped away the excess glue. I let it dry over night. Once it was dry, I removed the clamps and finished shaping the handle to match the knife outline. Once I had this shaped and sanded ending with 600 grit sand paper. I applied a wax finish. Buffed and finished the project. Please visit my we site http://nokeswoodworking.com/ For more on knives or other woodworking information.

The project turned out great. Now I will have to build another since I have two sons. This will make a great keepsake gift for them. You can visit Woodcraft by clicking on the link at the right column. The knife scales (wood for handles) are purchased separate from the kit.

Wednesday, April 2, 2008

Tung Oil an oil based wood finish

Tung Oil or china wood oil as it is sometimes called is an oil based wood finish. Tung Oil is made from the pressed seed of the nut from a tung tree.
Most tung oil products sold at retail are not pure tung oil. They may have tung oil as the major ingredient but have other additives such as varnish.
Pure tung oil can be bought at places like Woodcraft or Rockler.
Pure tung oil is non toxic and has been approved by the FDA for food contact. Pure tung oil is water resistant, will not darken with age. It penetrates well. The down side it is it dries slowly and takes 3-6 coats to give good protection.
The the surface should be dust free. Any filling, sealing or staining should be done prior to oil application. Apply a liberal amount of oil, wait 20 minutes for it to soak in and then wipe off exceed. Check back in an hour to make sure there is no draining and if there is wipe again. Allow to dry for 24-48 hours. Use fine steel wool between coat and apply 3-6 coats.
http://nokeswoodworks.com

Sunday, March 30, 2008

Carving in the woodshop

I decided this weekend, that I wanted to do a carving project, so off to the wood store I go. After looking though all of the books, I decide I want to learn to do a caricature carving.
So I pick out a book. I go over to the carving section and pick out a new detail carving knife, I have a couple of knifes already but a new project should have a new knife. I also pick up a block of basswood. Now I'm ready. I have competed several carvings of birds and animals but never cared a caricature before.
The book I picked out is called: Caricature carving from Head to Toe. A complete step by step guide to capturing expression and humor in wood. The author is Dave Steton. Published by Fox Chapel Publishing.
I picked this book because it has step by step pictures of how to carve. It has information on carving knives. How to make models in clay, how to carve faces with expression and goes into painting.
After reading the book, I found it teaches both composition and technique. It also teaches you much more than just he projects in this book. I will start the project today, starting with a rough out.
Randy Please visit my web site.
http://nokeswoodworks.com/

Saturday, March 29, 2008

Box Making as a woodworking craft business

BOX MAKING AS A HOBBY OR BUSINESS

Here is the question: Can box making become a profitable woodworking craft business?

Boxes have always held a fascination for me even when I was a small kid. From the pirate treasure to my treasure chest which held all my valuable stuff.
I still have a wood wood that I keep my so called treasures in. I have build boxes for both of my boys to store there treasures and they both use them.
So I think there is a market for boxes. A box needs to be something special for it to sell. By special I mean it has to either be decorative or it needs to be build to hold something special and needs to be marketed that way.
Decorative may mean use of a beautiful wood grain or combination of woods. Now special means it needs to cater to a need , such as i have listed below. These are just a few of the special box needs out there.

1. Wedding Box : to hold wedding cards, pictures or memories from a wedding, can be marketed through wedding shops.
2. Tea Box : To hold those special teas. Can be marketed as a gift box or direct to hotels and restaurants.
3. Toy box : Every Child need a toy box.
4. Jewelry box.
5. Keepsake box.
6. Bible box.
7. Men's Valet box.
8. Spice box.
9. Wine bottle boxes for special gifts.
10.Treasure chest, of course.
A box can be built for almost any hobby or collection out there. So built and market products to customers for a reason. Even my wife uses a box to store her sewing and quilting stuff in.
I have pen boxes, salt boxes, and candle boxes all over the house.
So the answer to the question is yes, if one puts there mind to it and builds something beautiful or something useful, there can be a market for it.
I will be doing articles on how to market on my web site. Please visit often : http://nokeswoodworks.com/

Sunday, March 9, 2008

Wine Stopper or Bottle Stopper

Turning a wine or bottle stopper is similar to turning a pen. Use the same lathe, same turning tools.

Start with a blank of wood 1 1/2" X 1 1/2" X 2".
This will be placed in a drill press vise ready to drill, you may want to start with a Foster 3/4" drill bit to recess
the hole depending on type bottle stopper you are using. If you do recess the hole, then center Fostner bit on
the blank and drill down 3/8 of an inch.
Next insert a 6mm drill bit and drill down 1". This will be the first step if you decide not to recess the hole.

You will need a bottle stopper mandrel, attach the mandrel to the head stock. Then screw the stopper onto the
mandrel using the 6 mm hole just drilled. Now pull up the tail stock and tighten to secure.

Using a skew and spindle gouge turn the stopper to desired shape. Sizes and shapes may vary.
Remove tail stock and finish turning. I use a spindle master for most of my turning work.

Now sand using progressive grits of sand paper to 600 grit. Apply finish, this can be wax, sanding sealer, wood
turners wax or a CA finish.

Remove the turned piece and glue the head to the stopper with thick CA glue. I always use epoxy

There are a couple of different types of stainless steel stopper. Some people use a dowel in the hole and glue a
cork to the other end. See my web site for more on turning.

Randy
http://nokeswoodworks.com

Saturday, March 8, 2008

The most used hand plane in my shop.

In my shop , there is no doubt which hand plane is used the most. I collect hand planes an have over 100 panes in my shop. The most used is the Lie Nielsen 103 standard angle block plane. I use it daily to trim , make things fit and to make my projects look good. It has a small body, only 5 1/4" long. Which makes it fit easily in my hand. It is simply amazing the amount of uses I find for it. It is made of bronze and the blade is 1 1/4" wide. It fits in my apron pocket and does everything I ask it to do. The plane most people think of when asked what is the most popular hand plane is the Stanley number 4 plane, but I have many more uses for this little block plane than I do a number 4. If you can only afford one plane, get this plane. I have at least 5 or 6 other brands of block planes in my shop but none compare to this little baby.
Randy
http://nokeswoodworks.com

Tuesday, March 4, 2008

Glue for Outdoor Projects and Furniture

Now for the sticky stuff.
When building outdoor projects that need to be glued. It is best to use a glue suited to the outdoors and moisture.
The following glues can be used on outdoor projects:
1. Titebond II Premium glue, It passes ANSI type 2 water specs. Use above 55 degrees, assembly time is 10-15 minutes, designed for outdoor use. It is unaffected by finishes , has excellent sand ability and cleans up with water.

2.Titebond polyurethane glue has 20 minute working time and a 45 minute clamp time Dries yellow, use above 50 degrees, Passes type 1 and type 2 ANSI spec for water resistance. Bonds to virtually anything. Has epoxy like strength with no mixing.

3.Titebond III dries to light brown, use above 47 degrees has a 10 minute working time. Water clean up and passes type 1 ANSI std for water resistance.

4. Gorilla Glue , 100% water proof passes ANSI test for type 1 1nd 2 std for water Resistance. Unaffected by extreme heat or cold. It is sandable, paintable and stainable working time is 10-15 minutes with 1-2 hour clamp time.

There are others but these I have used and they all work. For more information on outdoor projects or furniture , please visit my web site.
htt://nokeswoodworks.com

Monday, March 3, 2008

Wood Type for Outdoor Furniture and Projects.

What type wood should you use for your outdoor furniture or wood projects. There are several types of wood you can use. Here are some of your choices.
1. Pressure treated Lumber ( Use only ACQ treated lumber) It is moisture and insect resistant. It is available in most home stores. Can be painted after the wood has dried well. Used mostly for fences, decks and landscaping. May warp or twist.
2. Western Red Cedar which is naturally durable. It has good dimensional stability.
It has a natural beauty and will turn silver grey with time. With proper care this can last a lifetime.It has natural oils that act as a preservative. It is light weight and easy to work.
3. Teak is one of the best woods for building out door furniture. It is also the most expensive. It is resistant to bad weather and insects. It is capable of holding up to wet weather and sunshine. The natural wood color is a beautiful honey brown.
4. Cypress has a natural preservative oil which makes the wood resistance to insects and decay. Very durable and stable does not warp. Easy to paint and holds paint longer than other woods.
5. White Oak heavy hard wood which is resistant to moisture and insect. Takes stain well. May check is left untreated.
6.Northern white cedar is a softwood and is naturally rot resistant and insect proof. Weathers to a silver grey. Light weight and easy to use.
7. Southern Yellow Pine is a softwood which is highly wear resistant. This wood requires a good finish and must be reapplied yearly.
All wood furniture except Teak, Cedar and Treated Wood needed to be stored in doors for the winter months. Always use either stainless steel,hot dipped galvanized or aluminum fasteners. See my web site for more information on finishing, plans and care of outdoor furniture. http://www.nokeswoodworks.com

Sunday, March 2, 2008

Woodworking and Crafts, sell on line at Etsy.com

Ae you looking for a place online to sell your woodworking, pens or other crafts without actually setting up a web page? Well the anwser might me a web site called http://www.etsy.com/ . Etsy has been around since 2005 and is an online make place for buying and selling all things hand made. Over 100,000 sellers worldwide have opened shop. Etsy really is a cool place to sell your crafts and it's easy to use. There are lots of categories to sell your goods. A few are candles, jewelry needlecrafts, quilts, pets, toys, supplies and woodworking.
Make sure you read and follow there terms of use.
http://www.nokeswoodworks.com

Saturday, March 1, 2008

Lathe Speed, Pen Making and Bowl Turning

What speed should you set your lathe to when turning different projects.
I have guidelines that I use when selecting what lathe speed to use. The speed you use should allow the blanks to turn with little or no vibration. So if you turn the lathe on and there is vibration, shut it down and lower the speed.
I always wear a face shield, which is a good safety practice.
My guidelines for turning wood are as follows:
Pen Turning 3000 RPM or higher
Stock smaller than 2" can turn at 3000 RPM
Stock which is 3" can turn at 2000 to 2800 RPM
Stock which is 5" can turn at 1200 to 1800 RPM
Anything over 6" should be turned at less than 1000 RPM
When sanding I always slow my lathe down to 500-600 RPM
When applying finish, I set it to it's lowest speed. Which for me is 500 RPM
These guidelines are for wood, if you turn other material, these may not be right for you.
These are only guides, try different things and see what works best for you.
Always wear a face shield or at least safety glasses when turning. And if it doesn't feel right shut it down. Do not turn wood with defects, cracks or knots.
http://nokeswoodworks.com/

Thursday, February 28, 2008

Pen Making and other Mini Lathe Projects

A mini lathe is great for Pen turning. I have a Jet mini lathe I use for all of my turning and woodworking. In addition to turning pens on my lathe I have also made the following projects.
1. Wine stoppers
2. Small bowls
3. Candle Holders
4. Tables legs for shaker tables (can be seen on mt web site)
5. Small birdhouses
6. Knobs for other woodworking projects
7. Tool handles
8. Duck call
9. Lidded boxes
10. Key rings
11. Small plates
12. Doll house furniture
I'm sure there are other items but this list may give you an idea of what a small lather can be used for. I have an extension for my lathe but rarely use it. In fact the only times I have used it, is in turning table legs and one time I made a cane. So an extension is not something I would buy right away. Be careful with a mini lathe, it can become addictive.
http://www.nokeswoodworks.com/

Wednesday, February 27, 2008

WOODWORKING, GLUE SPOT PROBLEM

Glue Spots, Ways to avoid when woodworking.

One of the problems most woodworkers have is glue spots which show up during the staining or finishing process. Once a project is stained and spots start to show up, it can be very difficult to correct or touch up...
There are a few things we can do to help with this problem.
Some woodworkers solve thee problems but pre staining there wood parts before assemble. This way any glue squeeze out is on top of the stain and can be wiped off with a wet rag. I don’t like to use this method. I always seem to do something to the finish during clamping or assemble that is almost as hard to touch up as the glue squeeze out or the spots.
The next helpful thing is to tape around joints before assemble, so that glue squeeze out goes on the tape and not the wood. Be careful not to get the tape into the joint. It makes for easier removal.
The last thing we can do is to let the glue squeeze out semi dry to a gel. Once this has happened, you can use a scrapper on a flat surface to scrape away the glue. If you are in a corner or at a joint, you can use a chisel to remove the glue.
One thing you do not want to do is use a dry rag to wipe away glue squeeze out. I do noe even like doing this with a wet rag. You still can have glue spread around on the wood which makes matters worst.
Please check out my web site http://nokeswoodworks.com

Sunday, February 24, 2008

Pen Making with plastic blanks

Plastic Blanks
When drilling blanks made with acrylic plastic, you will need to go very slow or the plastic will melt and clog. This could cause the blank to split.The drill bit needs to be very sharp or you may tend to oval the top of the hole. I like to use a twist drill on plastic blanks. A brad point bit is my favorite on wood but on plastic the brad point seems to skate around a lot.

I have switched to epoxy for gluing the brass to the pen blank but gap filling CA glue will work as well.

I sometime use a sander to round the blanks prior to putting them on the lathe. It seems to help a little.

One again when on the lathe, you must use very sharp tools. The sharper the better.
Please visit my web site for more information.
http://nokeswoodworks.com

Thursday, February 21, 2008

Drill Bits, A quick run down


Drill Bits
There are several types of drill bits out on the market today. The drill bit on the left is a twist bit and comes in steel which is inexpensive but does not stay sharp very long. You can also get these in High speed steel (HSS) which will last much longer. You can also get them titanium coated and carbide tipped which will both last longer but cost alot more. The next bit is a brad point bit which prevents skating and has wide flutes keeping it cooler longer. These are my favorite bits for drilling in wood. Especially wood pen blanks. The third bit is a bullet point drill bit, the ones I have are from Dewalt. These are also very good bits for drilling in wood and I would highly recommend for all wood projects even pen blank drilling.
The 4th bit shown above is a forstner drill bit. Used for drilling plug holes, clock inserts or any where a flat bottom hole is needed. The last bit pictured is a spade bit, used for drilling wood. I don't use this type bit very often. It is something I use if I have to drill a hole in a 2x4 to pass wire through.
The most common drill bit is the twist bit, which is very versatile and when purchased in HSS is a good all round bit.
Please visit my web site under general for more information on drill bits.
http://nokeswoodworks.com

Monday, February 18, 2008

New Sharp Chisels

When you go to the store to buy chisels , the first thing you have to do when you get them home is to sharpen them. Looks like if you bought a new chisel they would come sharp. And the truth is I hate to sharpen chisels. So why don't they come sharp. Well my guess is cost. Well last week I was bought a couple of new chisels and guess what they were sharp! Yea right from the store they were sharp. I have been using PFEIL Swiss made carving gouges for years, now they have come out with a set of bench chisels and they are great. First they are sharp and ready to use. And IF they hold an edge like the carving gouges they will be a pleasure to work with. If you get a chance try one of these babies out, I'm sure you will like it.
Please visit my web site at http://nokeswoodworks.com