Turning a wine or bottle stopper is similar to turning a pen. Use the same lathe, same turning tools.
Start with a blank of wood 1 1/2" X 1 1/2" X 2".
This will be placed in a drill press vise ready to drill, you may want to start with a Foster 3/4" drill bit to recess
the hole depending on type bottle stopper you are using. If you do recess the hole, then center Fostner bit on
the blank and drill down 3/8 of an inch.
Next insert a 6mm drill bit and drill down 1". This will be the first step if you decide not to recess the hole.
You will need a bottle stopper mandrel, attach the mandrel to the head stock. Then screw the stopper onto the
mandrel using the 6 mm hole just drilled. Now pull up the tail stock and tighten to secure.
Using a skew and spindle gouge turn the stopper to desired shape. Sizes and shapes may vary.
Remove tail stock and finish turning. I use a spindle master for most of my turning work.
Now sand using progressive grits of sand paper to 600 grit. Apply finish, this can be wax, sanding sealer, wood
turners wax or a CA finish.
Remove the turned piece and glue the head to the stopper with thick CA glue. I always use epoxy
There are a couple of different types of stainless steel stopper. Some people use a dowel in the hole and glue a
cork to the other end. See my web site for more on turning.
Randy
http://nokeswoodworks.com
I will post woodworking projects and tips. There will be furniture, toy making and penmaking projects and tips.
Showing posts with label projects. Show all posts
Showing posts with label projects. Show all posts
Sunday, March 9, 2008
Thursday, February 28, 2008
Pen Making and other Mini Lathe Projects
A mini lathe is great for Pen turning. I have a Jet mini lathe I use for all of my turning and woodworking. In addition to turning pens on my lathe I have also made the following projects.
1. Wine stoppers
2. Small bowls
3. Candle Holders
4. Tables legs for shaker tables (can be seen on mt web site)
5. Small birdhouses
6. Knobs for other woodworking projects
7. Tool handles
8. Duck call
9. Lidded boxes
10. Key rings
11. Small plates
12. Doll house furniture
I'm sure there are other items but this list may give you an idea of what a small lather can be used for. I have an extension for my lathe but rarely use it. In fact the only times I have used it, is in turning table legs and one time I made a cane. So an extension is not something I would buy right away. Be careful with a mini lathe, it can become addictive.
http://www.nokeswoodworks.com/
1. Wine stoppers
2. Small bowls
3. Candle Holders
4. Tables legs for shaker tables (can be seen on mt web site)
5. Small birdhouses
6. Knobs for other woodworking projects
7. Tool handles
8. Duck call
9. Lidded boxes
10. Key rings
11. Small plates
12. Doll house furniture
I'm sure there are other items but this list may give you an idea of what a small lather can be used for. I have an extension for my lathe but rarely use it. In fact the only times I have used it, is in turning table legs and one time I made a cane. So an extension is not something I would buy right away. Be careful with a mini lathe, it can become addictive.
http://www.nokeswoodworks.com/
Labels:
jet tool,
mini lathe,
pen making,
projects,
turning,
woodshop,
woodworking
Saturday, January 19, 2008
Google Sketchup
Today I woke up and it's 9 degrees outside, so there is no woodworking today. Today I will be trying out google sketch up. I have heard it is great for woodworking projects. Best of all it is free. Just go to google sketchup and down load your free copy. It says it is easy to learn, and after what little I have played with it, I think it will be easy, but will still take several hours if not a full day to be able to really create anything usefull with it. It can do 3D modeling, it has video tutorials and an on line users guide. as well as a quick reference guide.
As I said I have played with it a little and it is very easy to start drawing. It has presective guideline which will help with the 3d aspect. It will work in inches or cm.
One of the really cool things about sketchup is the tape measure. It has a little tape measuse use to measure any line or any point on the drawing. It really looks like a little tape measure. It will measure to 1/16 th of an inch.
Overall I cant wait to get started. i have a few projects that i want to create working drawings, so that when it does warm up , I can get back to the shop and start building.
If you have every wanted to get into computer adided drafting or drawing. This is the easiest way I know. It free, its easy, its great.
By the way it has now been 8 weeks since my knee replacement and everything is going great. I have not had a pain pill in two weeks. I am really getting around good now.
As I said I have played with it a little and it is very easy to start drawing. It has presective guideline which will help with the 3d aspect. It will work in inches or cm.
One of the really cool things about sketchup is the tape measure. It has a little tape measuse use to measure any line or any point on the drawing. It really looks like a little tape measure. It will measure to 1/16 th of an inch.
Overall I cant wait to get started. i have a few projects that i want to create working drawings, so that when it does warm up , I can get back to the shop and start building.
If you have every wanted to get into computer adided drafting or drawing. This is the easiest way I know. It free, its easy, its great.
By the way it has now been 8 weeks since my knee replacement and everything is going great. I have not had a pain pill in two weeks. I am really getting around good now.
Labels:
google sketchup,
knee replacement,
projects,
woodshop,
woodworking
Subscribe to:
Posts (Atom)