Showing posts with label pens. Show all posts
Showing posts with label pens. Show all posts

Saturday, October 3, 2009

Pen Project with Cross Clip for Church



I just finished doing a project for a church. The church was expanding and had to cut down a Maple tree. They contacted me and wanted me to make 200 pens for them.



I used a slimline kit for the base. I added a fancy center band and a cross clip from Woodcraft.

I made a sample and we agreed on a price, the church shipped the wood to me. It arrived on a banded pallet, which consisted mainly of cut up logs. I had to take the logs and cut the logs into pen blanks.


As you can see from the picture at the right, the shipment basically looked like a load of fire wood. Some of the logs were pretty big. I split the logs and then used my band saw to cut the wood into rough pen blanks.




The rough pen blanks were dried by stacking them and air drying along with the use of a micro wave oven to air dry the blanks.




Once the blanks were dry, there were cut, drilled and turned to shape. There were sanded and finished with a protective coating.


The pens were assembled and packed in plastic pen cases and shipped to the church.


The church was very please upon receipt of the pens. There was a lot of work involved in making 200 pens at one time but I enjoyed the project.
If you have a project you would like made from a special piece of wood or any custom project, please contact me.
Also visit my web site at http://nokeswoodworks.com/

Thursday, February 21, 2008

Drill Bits, A quick run down


Drill Bits
There are several types of drill bits out on the market today. The drill bit on the left is a twist bit and comes in steel which is inexpensive but does not stay sharp very long. You can also get these in High speed steel (HSS) which will last much longer. You can also get them titanium coated and carbide tipped which will both last longer but cost alot more. The next bit is a brad point bit which prevents skating and has wide flutes keeping it cooler longer. These are my favorite bits for drilling in wood. Especially wood pen blanks. The third bit is a bullet point drill bit, the ones I have are from Dewalt. These are also very good bits for drilling in wood and I would highly recommend for all wood projects even pen blank drilling.
The 4th bit shown above is a forstner drill bit. Used for drilling plug holes, clock inserts or any where a flat bottom hole is needed. The last bit pictured is a spade bit, used for drilling wood. I don't use this type bit very often. It is something I use if I have to drill a hole in a 2x4 to pass wire through.
The most common drill bit is the twist bit, which is very versatile and when purchased in HSS is a good all round bit.
Please visit my web site under general for more information on drill bits.
http://nokeswoodworks.com

Saturday, January 26, 2008

Pen Making as a craft business

One of my hobbies which I have turned into a sell-able craft is my pen making. Pens are made using a mini lathe to turn a block of wood or plastic to shape to hold the pen workings, which I buy as a kit. I will use this as an example of my costing process. Pen Kits can vary from $2.95 a kit to 59.95 a kit depending on what kind of pen you want to make. The pictures below are of cigar pens. The cost for this kit is $ 5.95. The wood blank will cost from $1.00 to 6.95 depending on type of wood or plastic. I will use $ 3.00 in this example. The pen kit is $5.95 plus $3.00 for the pen blank will total materials of $8.95. It will take me 1/2 hour to make this pen at $15.00 per hour labor. Now my labor and material total $16.45. I them add overhead and profit. I figure my overhead and profit to be the same as material and labor which is $16.45. This give me a total selling price of $32.90. I i always throw in a case and sell them for $34.95. I have pens which sell for more and I have pens which sell for less.
Please visit my website for more woodworking and craft information
http://nokeswoodworks.com

Sunday, January 13, 2008

Pen Making Pictures


Here is a picture of some of my pens.
These are all Cigar pens.