Monday, January 26, 2009

Pen Blank Drilling Jig Basic Homemade


Here is a basic homemade pen blank drilling jig I made. Its not fancy but it gets the job done.

I took two pieces of 1 1/2" X 1 1/2" wood 8" long. I joined them using a 1"X 1" hinge. To form a vise. I then marked two sets of vee notches in the wood. Using my bandsaw I cut out the notches.

The 1st vee notch is slightly smaller than 5/8" and the 2nd is slightly smaller than 3/4". These are the normal size for pen blanks. Using the notched to center and the vise like hinge to hold, I can drill a pen blank in no time at all and it will be straight and square. You can buy pen blanks and pen kits at woodcraft by clicking on the link to the right.

Please visit my web site for more information and tips on pen making, bowl turning and woodworking in general. http://nokeswoodworks.com

2 comments:

Unknown said...

Thank you for give vastly nice info. Your web page is coolI am impressed by the information that you have on this web page. It shows how well you understand this topic. Bookmarked this page, will come back for further.
Used CNC Router

Blogger said...

Get instant access to 16,000 woodworking plans.

Teds Woodworking has more than 16,000 woodworking blueprints with STEP-BY-STEP instructions, photos and drafts to make all projects very easy!