Saturday, June 7, 2008

Mini lathe project, Make-up brush




Making a make up brush on the mini lathe. I purchased the actual brush and a plastic blank with an embedded rose from Arizona Silhouette. The blank comes in a round form. I place this round blank in my scroll chuck, in order to drill a hole to insert the brush. Once this was drilled, I had to enlarge the hole using lathe tools. I then changed drill bits and drilled a hole for the mandrel to screw into the blank to hold the blank while I finished turning it to shape.
The blank is turned to shape using a skew and a spindle gouge.
One the shape is achieved the blank is then sanded to a glass like finish. Using different grits of sand paper and then a final buffing at the buffing wheel. Once the blank is completed, the brush is
inserted in the hole using epoxy. Makes a great gift for your wife, mother, or girl friend.
This is one great project. Almost every woman I know uses a make up brush. For more on mini lathe projects , as well as more pictures of this project, please visit my web site. http://nokeswoodworks.com/

Monday, June 2, 2008

Making Wine Stopper or Bottle Stopper kits,Stainless steel

WINE or BOTTLE STOPPER KITS




I recently purchased some stainless steel bottle stoppers from Arizona Silhouette. The wine stoppers are made of stainless steel and should not corrode for any reason. These are the best kits on the market
The wood is turned in the usual way. I drilled and tapped the hole to create threads on which the stopper could be mounted. The tap was sized at 3/8" to fit the stopper.
Here are some of the pictures from my new stoppers.
Please visit my web site for more on turnings with a mini lathe
http://nokeswoodworks.com/






Saturday, May 17, 2008

Father's Day Gift for the Woodworker

It's that time of year again, to think about what to get Dad for Father's day. If your Dad is a woodworker then I am sure a surprise woodworking tool will be in order. One idea could be to go to Woodcraft and get a gift certificate. A gift certificate will allow him to get anything he wants.
As a woodworker, I confess that any tool, even if I already have one, is a great gift. I have 3 drills and 3 routers and I use them all.
A new square is always needed. A set of drill bits, is always useful. Woodworking books are always a favorite for me. A new circular saw by Dewalt or Porter Cable is on my wish list.
A Bosch Colt trim router is a great idea. If your Dad is into carving, Woodcraft has just come out with a new line of Hock Knives, you can't go wrong with a new detail knife from Hock. If your Dad has a lathe, try a new Sorby spindlemaster turning tool, unless of course you want to purchase him a new lathe.
If you are not into buying tools or books, Dad's can always use a new baseball cap.
Please visit my web site http://nokeswoodworks.com/

There is a link to woodcraft in the side bar.

Sunday, May 11, 2008

Pen Kit Finish Notes

Notes about pen kit finishes:

24kt Gold Pens with 24k gold plating usually wear very quickly most have a coating of epoxy on them to help extend the wear life of the pen.

10k Gold pens with 10k gold plating wear better because the gold is mixed with hard nickel to form a more durable gold plating with is also cheaper. wears better than 24k gold.

Chrome pens, Chrome is used where there is alot of everyday use such as key rings, very durable and looks great at cheap price. Chrome is very shiny and very good looking. Wears better than 24k or 10 k gold

Black chrome. These are pens plated with a black color plating. The black has a soft sheen which is attractive against light color woods. It is more durable the 24k gold but less durable than 10k gold.

Satin pens get a plating that is a matte finish and gives a satin look to the pens, The finish has a slight texture to the feel of then. This more durable than 24k gold and less then 10k gold slightly more durable than black chrome.

Black Titanium pens are coated with a titanium plating which looks good and is very wear resistance. This finish give one of the most durable finished to pens.

Rhodium plated pens are the top of the line and the best looking pen kits available on the market there durable is equal to or better than Titanium. The appearance is the great.

For more information on pens please visit my web site: http://nokeswoodworks.com

Randy

Friday, May 9, 2008

Pen Making Abalone Kit


This is a Wallstreet II Tropical Isle Abalone Kit from Woodcraft. I did this kit as a Mother's day gift for my wife. The kit came with the hole already drilled and the brass tube inserted. The polyester resin the Abalone is sealed is more difficult to turn than normal acrylic blanks. The polyester resin can easily chip. Sharp tools must be used. During the turning process, the blank on this pen chipped out near the edge. I used a small file while the lathe was on to soften the rough edges before continuing to turn the blank .

I finished turning the pen blank and then completed it in the normal way using sand paper. I buffed the blank to a final shine and assembled the pen using a pen press. For more pictures on this project please visit my web site.
Randy









Sunday, April 27, 2008

Carbara Pen Kit using a Rattlesnake Blank

Rattlesnake Pen
I used a rattlesnake pen blank and a Black Titanium Carbara Pen kit to build this rattlesnake pen. These blanks are more difficult to turn compared to wood or regular acrylic. Care must be taken because the acrylic can be easily lifted off the surface of the snakeskin because of the chemicals used to tan the snake hides. Sharp tools must be used.
The blanks come with the brass tube already inside the skin and acrylic. Therefore you do not need to drill and glue the brass tube.
You will however have to size the blank and square the ends. The sides of the blanks are also removed during the sanding process. See the drawing that came with the blank for this detail.

The edges were sanded and the blank was placed on the lathe. I used a spindlemaster lathe tool to turn the blank down to size. The lathe tools must be extremely sharp. I stopped 4 times to hone the tool while cutting the blank to size. I stopped cutting short of the bushing size. Sandpaper was used to complete the projects. I used micro mesh and an acrylic finish to complete the blank. The blank was assembled using a pen press. More ideas can be seen at my web site:
http://nokeswoodworks.com/

The rattlesnake blank and pen kit came from: Arizona Silhouette at http://ArizonaSilhouette.com .



Sunday, April 20, 2008

Pen Making The Wall Street II Pen kit

Wall Street II Pen kit from Woodcraft.

The following pictures may be helpful in understanding the steps needed to build the Wall Street pen kit that I purchased from Woodcraft. The finished pen is illustrated here to the right. These are easy pens for the beginner and fun for the experienced turner as well. I used my Jet mini lathe and Robert Sorby turning tools.

The picture to the left shows the pen kit parts, drill bit 27/64 , the wood blank and the epoxy used to make the pen kits. The first Step is to cut the blank to length. Use the brass tube to measure and mark the blank for cutting. Cut the blank a little longer than the brass tube. It will be made to length later. Mark the center of the blank on the end before drilling. Drill slowly and clean out drill bit often. If you get the blank too hot or do not clean out the bit you will get a blow out on the blank. As you can see in the picture I have a home made pen vise that I have used successfully for years.


After the pen blank is drilled. I sand the brass tube lightly before mixing epoxy to glue the tube inside the blank. I like epoxy more than CA glue, but CA glue will work fine also. After the pen blank has dried I then go to the sander to square up the ends. A picture of this process can be seen on my web site: http://nokeswoodworks.com/


Once the ends are square, It is ready to be mounted on the lathe using a bushing and a pen mandrel. The picture to the right shows the pen blank mounted to the lathe .


Once the blank is mounted to the lathe, and everything is tightened up. The blank is then ready to be turned. Refer to my blog on lathe speeds for correct turning speed for pens or other projects. There are pictures of the actual turning process on my web site. A gouge is used to reduce the pen blank to a rough round size. A skew is then use to take the blank to proper size. I use the spindle master instead of a skew. This smooths the blank and gets it to the right size ready for sanding. I use a range of sand paper from 120 to 600 and then use micro mesh to 6000 for the sanding process. Once this is complete I use a finish of my choice. In this case I used Hut crystal coat to finish this pen. This is a friction polish and is applied with a cotton cloth and rubbed into the wood while the lathe is running. Once the finish is complete the pen blank is removed from
the lathe. It is assembled using a pen vise. Please visit my web site for more pictures and more information on pen making. http://nokeswoodworks.com/

This kit can be purchased from Woodcraft. See link to the right.