Probotix x90 build 1st day

Although some of the parts were the wrong size, I went ahead and started the build.
1st thing was to insert rod bushings in base.
Then apply nuts to back side of bushing.
Then threads rods and pvc pipe are put into place.
Along with the main rods.
Slides are placed on rods see pic.
Then other base is attached.
Square up base and tighten bolts.
This completes the part I can complete today.
I called probotix and the new parts were sent same day.
I will start on them once I get the new parts.
So far all parts seem to fit well and appear to be quality parts.

Probotix X90 CNC build

The package arrived via UPS, everythen looked good. See package. Also see open package pics.
I then laid everything out on the table, to take inventory.
Thats when I found the problems. The grantry shaft, threaded rods and drive shaft were all the wrong size.
They had sent parts for a V90, which is 12X18 not 18X18.
I stopped the build and called customer service and was told new parts would be sent today.

CNC Router Table

This weekend, I build a table for the new probotix cnc, I expect to get today via ups. I used 2x6's for the frame and 3/4" plywood for table top.
It's 48"×36". This should allow plenty of room for the unit plus room for keyboard and computer monitor.
The computer unit on go on the shelf below.

After I get the unit build and in place, I will decide whst type of encloser to add, if any. I do think I will need something to control dust and maybr noise.

I will contunie with build.

CNC Router .....Probotix

I have final ordered a CNC router kit, after much research and trying to figure out the world Of the CNC router, I have decided to buy the X90 from Probotix.

I have looked at several CNC routers and Kits. All of which I think are good depending on what you want. My search mainly centered on Rockler's Shark CNC router, Woodcraft Oliver carver, Shopbot CNC router, Zen CNC router and the Probotix CNC router. After the research I decided on the X90 for a number of reasons. I looked at size, quality, price, customer service reviews, and how it fit into what I wanted to do with it.
The X90 is a kit which has been pre assembled at the factory and them taken apart for shipping. So i do have some assemble work once it arrives. It should be at my house via UPS on Monday.

The X90 has an 18"X18" work surface and uses a plan router. I will be using the Bosch colt.

I will do follow up blogs on the build of my machine and how well it works. So watch for those in the next few weeks.

I purchase the the USB version and the USB software which I think will make it easier for me. I will use an old HP desktop I had sitting in the basement for my control computer. It is basic but seems to have what I need for the base machine.

I will use my laptop in the house as my CAD/CAM machine. I did not buy cad/ cam soft wear with the machine, although they have good prices on both ARTCAM express and Mesh CAM.

I am now trying out VCARVE pro from Vectric Software to be my CAD/CAM software. As I make sure this will work well with the machine , I will purchase it as well, Vectric also has a 3D cam I may purchase later. ( by the way VCARVE pro and 3D come with the shark.)

There are three types of software needed to run CNC. One is your control machine software that runs the machine. As I stated I bought the PBX-USB software from Planet CNC. The second software is the CAD software such as Autocad used to actually draw the item you want to machine. The third piece is the CAM software used to convert the CAD software to Machine tool paths.

I selected VCARVE pro because it will do both the CAD and the CAM. It will do 2D and 2.5D but not 3D. You would need the 3D add on for that.

Please check back, as I will be updating as I build.

Hand carved wooden sign

Just finished hand carving a wooden sign for my work shop. NOKES WOODWORKS.
The sign is basswood. I used swiss made carving tools and a helive brand knife.
I first laid the letters on the wood using 3 inch letters.
Then lets the chips fly. All hand carved.

Cherry shelf with drawer

Made this cherry shelf with drawer for the kitchen,  needed some extra storage. Made my own cherry dowels for assemble. Using a dowling tool and die from lee valley.

Two more salt cellars

Made two more salt cellars, the light colored one Holly and the the darker one is Mulberry. Used brass rod as the rotating pin and small 1/4 inch rare earth magnets to hold it closed.